Replace which segments a product is shown to

PUT

/products/{productId}/segments

curl --request PUT \
  --url https://api.partners.collaterate.com/v1/products/example/segments \
  --header 'Authorization: Bearer <token>' \
  --header 'Content-Type: application/json' \
  --data '{ "segmentIds": [ 991, 992 ] }'

• Production (OAuth2 client_credentials, bearer token)
• Production (mutual TLS -- see "Authentication" below; only for partners onboarded this way)
• Staging (OAuth2 client_credentials, bearer token)
• Staging (mutual TLS)
• Test-B (OAuth2 client_credentials, bearer token)
• Test-B (mutual TLS)

This REPLACES the product’s segment assignment. The ids you send become the complete list, and any segment you leave out is unassigned. If you mean to add a segment, send the product’s current segments (from GET /v1/products/{productId}) plus the new one. Reading this as “add these” will remove your existing assignments.

Segment assignment controls who sees a visibility: VISIBLE_TO_SOME product. It has no effect on a VISIBLE_TO_ALL or HIDDEN product, though it is still recorded.

segmentIds: [] is legal and means “assigned to no segments”. On a VISIBLE_TO_SOME product that makes it visible to nobody, which is a real operation rather than a mistake – so it is accepted rather than refused.

Every id is validated against your own site before anything is written. If any id is not a segment on this product’s site, the whole request is refused with 400 invalid_segment_ids naming the offending ids, and nothing changes. Unknown ids are never silently skipped – because this is a replace, skipping one would delete real assignments while reporting success. Use GET /v1/segments for the ids you can assign.

Duplicate ids are collapsed and order is irrelevant.

Known limitation: adding a segment to a site-owned (SLO_) product currently fails with 400 monolith_rejected. This is an upstream defect (TTI-20767) that this API cannot work around. Removing a segment works, and re-sending the existing assignment unchanged works; only adding is affected. Share-backed (SLS_) products are unaffected. Add segments to site-owned products through the Collaterate admin UI until it is resolved.

Changes may take a short time to appear on the storefront. Nothing downstream is notified when an assignment changes – no search reindex and no cache eviction – so a storefront may serve the previous assignment briefly. The segments array in this endpoint’s response is authoritative immediately; treat a storefront lag as expected rather than as a failed write.

Authorizations

• oauth2
  partner-api/products:write
• mtls

Parameters

Path Parameters

productId

required

string

/^(SLO|SLS)_\d{1,18}$/

The SLO_/SLS_ prefixed identifier of the product to assign.

Request Body^required

Media typeapplication/json

PUT /v1/products/{productId}/segments – the complete segment assignment for the product.

This is a REPLACE: the ids here become the whole assignment and every omitted one is unassigned. [] is legal and means “assigned to no segments”.

additionalProperties: false is enforced by the service, not merely declared. An unrecognised key is far more likely to be a misspelling of segmentIds than a field you meant to send, and on a replace that mistake would empty your assignment and return 200 – so it is refused with 400 invalid_segments_body instead.

object

segmentIds

required

Segment ids from GET /v1/segments, all of which must belong to this product’s site. Duplicates are collapsed and order is irrelevant. Any id that is not assignable refuses the whole request with 400 invalid_segment_ids – none is ever skipped.

Array<integer>

<= 500 items

Examples

Show the product to two segments, replacing whatever was assigned

{
  "segmentIds": [
    991,
    992
  ]
}

Assign no segments

{
  "segmentIds": []
}

Responses

200

The product as it now stands, re-read after the write. Its segments array is the authority on what the replace actually did.

Media typeapplication/json

GET /v1/products/{productId} – one product, every variant grouped under it. productId/siteId/name/description/serviceType/shippable are shared by every variant and returned once, here; variants carries what differs per variant. See GET /v1/products (the Product schema) for the variant-grained equivalent of this same underlying catalog entry.

object

productId

required

The identifier passed in the path. See Product.productId.

string

siteId

required

The granted site this product belongs to.

integer

name

required

string

description

required

For an SLS_ product this is the value the storefront shows: the SHARE’s own copy when it overrides the master system offering’s display fields, otherwise the MASTER’s. Resolved by this API rather than read straight from the catalog view, which applies that rule to a warehoused share and not to a print-on-demand one.

string | null

serviceType

required

STOCK, POD, or DIGITAL. Only the first two are orderable through this API; a DIGITAL product is listed (it is catalog) but never orderable.

string

Allowed values: STOCK POD DIGITAL

shippable

required

boolean

updatedOn

required

The MAX updatedOn across this product’s variants, so a change to any one of them moves it, not just a change to the first.

string format: date-time

artworkSource

Product-level, like serviceType/shippable above – not per-variant. See Product.artworkSource.

string | null

Allowed values: USER_UPLOAD STORED TEMPLATE PLUGIN

productStatus

required

Always ACTIVE today. See Product.productStatus.

string

visibility

required

Product-level, shared by every variant. See Product.visibility.

string

Allowed values: HIDDEN VISIBLE_TO_ALL VISIBLE_TO_SOME

orderable

required

Product-level – its inputs (fulfillment center, service type, visibility) are all offering-level, so every variant shares it. See Product.orderable.

boolean

namePlural

required

The plural display name, when the site has set one.

string | null

excerpt

required

Short storefront blurb, when set.

string | null

metaDescription

required

SEO meta description, when set. For an SLS_ product this is the master system offering’s unless the share overrides the master’s display fields – the same inheritance description documents, and the same values the storefront renders.

string | null

metaKeywords

required

SEO meta keywords, when set. Inherited from the master system offering on the same rule as metaDescription.

string | null

urlPattern

required

The storefront URL slug, when set.

string | null

excludeFromSearch

required

Whether the site excludes this product from storefront search.

boolean

imageUrl

required

Fully-qualified URL of the product’s PRIMARY image. See Product.imageUrl.

string | null

thumbnailUrl

required

Fully-qualified URL of the primary image’s thumbnail, or null.

string | null

overrideDisplay

required

Whether a share-backed (SLS_) product overrides the master product’s display fields, or null on a site-owned (SLO_) product, which has no master and no override mechanism at all.

One flag covers several fields. false means description, metaDescription, metaKeywords and the thumbnail fields are all INHERITED from the master, and the values published here are the inherited ones – the same values the storefront shows. true means this share’s own values stand. There is no per-field inheritance, and writing one of those fields does not change the flag.

boolean | null

requiresApproval

required

Whether the site requires an approval step before this product’s orders proceed.

boolean

supplierReference

required

The site’s own supplier reference for this product, when set.

string | null

fulfillmentCenterName

required

The fulfillment center this product ships from, by name, or null when none is assigned – in which case the product is never orderable.

string | null

stockUnitOfMeasure

required

The unit the inventory fields count in (e.g. EA), when set.

string | null

segments

required

The segments this product is assigned to – what visibility: VISIBLE_TO_SOME gates on – ordered by name. Sourced from the segment assignments themselves, never from the catalog view’s denormalised (and unreliable) segment code column. [] means no assignments, which only matters when visibility consults them.

Array<object>

One segment assignment within ProductDetail.segments: the id and name only. The segmentId is the same id GET /v1/segments lists, and that endpoint carries each segment’s description – the vocabulary belongs there, not repeated on every product assigned to it.

object

segmentId

required

integer

name

required

string

variants

required

Array<object>

One variant within ProductDetail.variants – everything about a variant of GET /v1/products/{productId}’s product that is NOT shared with its other variants. weight is the same decimal-string field Product.weight publishes, unchanged.

object

variantId

required

The specific variant, or null for a POD product, which has no variant until the job is configured. Send it back exactly as received, null included, on an order line – see Product.variantId.

integer | null

sku

required

null for a POD product, which has no SKU.

string | null

availableInventory

required

Stock on hand, or null when untracked. See Product.availableInventory.

integer | null

inventoryTracked

required

Whether availableInventory means anything. See Product.inventoryTracked.

boolean

minQuantity

required

Minimum orderable quantity, or null for no minimum.

integer | null

maxQuantity

required

Maximum orderable quantity, or null for no maximum.

integer | null

weight

required

Per-unit weight as a decimal string, or null for a POD product, which has none until the job is configured. See Product.weight.

string | null

attributes

required

This variant’s attribute pairs. See Product.attributes.

Array<object>

One attribute pair of a variant. Both sides are always present – incomplete pairs are not published.

object

name

required

The attribute’s name, e.g. Color.

string

choice

required

This variant’s choice for it, e.g. White.

string

actualInventory

required

On-hand stock before reservations and backorders, or null when untracked – all four inventory fields are null together. See Product.actualInventory.

integer | null

reservedInventory

required

Stock reserved by open orders, or null when untracked.

integer | null

backorderInventory

required

Quantity on backorder, or null when untracked.

integer | null

defaultQuantity

required

The quantity the storefront pre-fills, when one is set.

Null for every STOCK product, always – there is no such setting on a stock product upstream, so this is not a gap in your data. On POD products it is derived from the pricing configuration, which this API does not expose. It is read-only and cannot be written through PATCH /v1/products/{productId}.

integer | null

Example

{
  "serviceType": "STOCK",
  "artworkSource": "USER_UPLOAD",
  "visibility": "HIDDEN"
}

400

One or more segmentIds is not a segment on this product’s site (invalid_segment_ids); or the body is malformed (invalid_segments_body); or the productId path segment is malformed; or the upstream system rejected the change.

Media typeapplication/problem+json

RFC 9457 application/problem+json body. code is the published, stable, machine-readable field to branch your integration logic on – detail is a human-readable string that may be reworded over time and must not be parsed.

This table is the whole published set: every code this API can return appears below, and nothing below is unreachable. test/docs/openapi-matches-reality.test.ts compares the enum to the codes the handlers actually construct, so a code added to one side and not the other fails the build rather than shipping.

Published code values:

code	HTTP status	Meaning	Retry?
invalid_cursor	400	The cursor query parameter could not be decoded.	No – restart pagination with no cursor. Do not resend the same value.
invalid_site_id	400	The siteId filter is not a positive integer, or it names a site outside your grant. detail says which.	No – fix the parameter against GET /v1/me’s grantedSiteIds.
invalid_order_number	400	The order number in the path is not a positive integer.	No – fix the path.
invalid_product_id	400	The productId path segment on GET /v1/products/{productId} does not match the SLO_/SLS_-prefixed shape.	No – fix the path.
invalid_service_type	400	GET /v1/products’s serviceType filter is not one of the values this API can order (STOCK or POD).	No – fix the parameter.
updated_since_not_supported	400	An updatedSince parameter was sent. Rejected rather than ignored, on purpose – see “No updatedSince / no change polling” above.	No – remove the parameter; there is no change-polling mechanism to switch to.
invalid_request	400	POST /v1/orders’s request body failed validation – malformed JSON, a missing or malformed field, an unknown key, or a body-level rule such as partnerLineId uniqueness or a misplaced shipTo – or GET /v1/orders/submissions’s status/limit filter is malformed. detail names the exact violation.	No – fix the request.
invalid_submission_id	400	The submissionId path segment on GET /v1/orders/submissions/{submissionId} is not a well-formed UUID.	No – fix the path.
invalid_quantity	400	The quantity on POST /v1/products/{productId}/quote is missing or not a positive integer.	No – fix the request body.
invalid_shipping_quote_request	400	POST /v1/shipping/quote’s body failed validation – malformed JSON, a missing or mistyped field, an unknown key at the top level or inside shipTo, or a weightOunces outside 0 < w <= 5000000. detail names the field.	No – fix the request body.
invalid_item_number	400	The itemNumber path segment on a proof route is not a positive integer. It is the line’s itemNumber from GET /v1/orders/{orderNumber}/items, never a Collaterate internal id.	No – fix the path.
invalid_token	401	The credential is missing, expired, or invalid.	No – mint a new token, retry once, then investigate the credential.
insufficient_scope	403	The token lacks the scope required for this operation.	No – mint a token with the required scope.
order_not_found	404	No such order, or one that exists outside your granted sites (see above).	No.
order_item_not_found	404	No line matching (orderNumber, itemNumber) resolves for you – absent, outside your granted sites, or hidden from the customer, identically.	No.
product_not_found	404	No such product, or one that exists but belongs to a site outside your granted sites (same rule as order_not_found).	No.
quote_product_not_found	404	The product resolved in our own catalog but Collaterate could not price it. Rare.	No.
template_not_found	404	GET /v1/products/{productId}/template found no Chili template for this product – not TEMPLATE-classified, TEMPLATE-classified with a legacy EDOC/CANVA vendor, or Chili-templated with no document configured. All three identically.	No.
submission_not_found	404	No submission exists with this id for your credential – whether it never existed or belongs to another partner, identically.	No.
ordering_not_provisioned	409	POST /v1/orders’s siteId has no ordering user configured. This is set up per (partner, site) by staff at onboarding; a partner cannot provision it themselves.	No – ask Partner Integrations to provision an ordering user for the site, then retry.
partner_order_id_reused	409	POST /v1/orders’s partnerOrderId was already used, with a request body that does not match this one. Resending the identical body under the same partnerOrderId is safe and returns the original submission (see the operation description); reusing it for a materially different order is rejected instead of silently creating a second order.	No – use a new partnerOrderId, or resend the exact original body to poll the existing submission.
proof_not_pending_review	409	A proof approve or decline was sent for a line whose proofStatus is not PENDING_REVIEW – no proof yet, already decided, or a state this API does not recognise. detail says which. On a RETRY of a decision that already succeeded, this is the expected answer and means success.	No – read the line’s current proofStatus from GET /v1/orders/{orderNumber}/items.
order_item_cancelled	409	A proof approve or decline was sent for a cancelled line. It will never be produced, so its proof cannot be decided.	No.
quote_invalid	422	Collaterate rejected the quote on business-validation grounds (e.g. quantity over the product’s configured maximum). detail carries Collaterate’s own validation message.	No – fix the request body (e.g. reduce quantity).
unknown_country_code	422	POST /v1/shipping/quote’s shipTo.country is not a country code Collaterate recognises.	No – send a code Collaterate carries (US, CA, MX, …).
unknown_state_code	422	POST /v1/shipping/quote’s shipTo.state is not a state or province of the country you sent. State codes are resolved WITHIN the country, since they are not unique across countries.	No – fix the state, or the country it belongs to.
shipping_quote_unavailable	422	POST /v1/shipping/quote produced no priced service at all for that destination and weight. detail carries Collaterate’s own reasons when it gave any – an invalid postal code for the country is the common one – and says so plainly when it did not.	No – fix the destination. An empty result is never returned as a 200.
denial_reason_not_available	422	POST .../proof/decline’s reason is well-formed but is not a denial reason this line’s proof offers – including a code that is valid on a different line, and UNKNOWN, which never is. detail lists what is valid here.	No – pick a code from GET .../proof/denial-reasons for this line.
rate_limit_exceeded	429	Rate limit or daily quota exceeded.	Yes – honor Retry-After.
internal_error	500	Unexpected server-side failure. Detail is always the fixed string below, never the underlying error.	No, or with caution – if persistent, contact Partner Integrations.
service_unavailable	503	Transient failure – typically the database path, but also a Lambda that crashed, timed out, or hit its own concurrency limit before any handler ran.	Yes, with backoff.

Three statuses are answered by the API gateway before your request reaches application code: 401 (authorizer denial), 429 (usage-plan throttle), and 503 (the Lambda integration itself failed). All three are configured to return this same document with the codes above, so one parser and one branch on code covers every error this API produces. The 403 on GET /v1/ping is the sole exception anywhere in the API – it comes from the edge firewall, which is not ours to shape, and carries no problem document.

object

type

required

Always the literal string about:blank today; reserved by RFC 9457 for future use.

string

Allowed value: about:blank

title

required

Short, human-readable summary of the HTTP status (e.g. “Not Found”).

string

status

required

The HTTP status code, repeated in the body for convenience.

integer

code

required

Stable, machine-readable error identifier. Safe to branch on. See the table above.

string

Allowed values: all_segments_visible_reset_not_acknowledged artwork_reservation_not_usable audit_unavailable auto_assigned_segments_present credit_account_not_found cursor_not_supported_with_search denial_reason_not_available division_code_conflict division_create_requires_address division_not_found division_not_on_site division_parent_invalid image_not_found insufficient_scope internal_error invalid_active invalid_adjustment_type invalid_cursor invalid_credit_account_id invalid_division_id invalid_image_id invalid_image_patch invalid_item_number invalid_order_number invalid_product_id invalid_product_patch invalid_quantity invalid_query invalid_request invalid_segment_ids invalid_segments_body invalid_service_type invalid_shipping_quote_request invalid_site_id invalid_submission_id invalid_token invalid_user_id invalid_variant_id invalid_variant_patch monolith_rejected monolith_target_missing null_not_supported order_item_cancelled order_item_not_found order_not_found ordering_not_provisioned parent_is_self parent_not_on_site partner_order_id_reused product_not_found product_write_partially_applied proof_not_pending_review quote_invalid quote_product_not_found rate_limit_exceeded search_not_available segment_not_on_site service_unavailable shipping_quote_unavailable site_id_required_for_search site_not_found sls_null_backfills_master submission_not_found template_not_found unknown_country_code unknown_query_parameter unknown_state_code unsupported_field_for_service_type updated_since_not_supported user_already_exists user_not_found variant_not_site_addressable

detail

required

Human-readable explanation. Do not parse this – it may be reworded without notice.

string

requestId

required

Echoes the request’s id. Include this when contacting Partner Integrations about a specific failed call – it resolves directly to one log entry.

string

Example

{
  "type": "about:blank",
  "title": "Bad Request",
  "status": 400,
  "code": "invalid_segment_ids",
  "detail": "These segment ids are not available on this product's site: 777, 888. Use GET /v1/segments to list the segments you can assign. The whole request was refused and nothing was changed -- unknown ids are never silently skipped, because this endpoint replaces the assignment rather than adding to it.",
  "requestId": "8f3c1e2a-..."
}

401

Missing, expired, or otherwise invalid credential. Not retryable as-is.

Produced by the API gateway’s authorizer, before the request reaches any application code, so every cause – no Authorization header, a malformed one, a token that is expired, wrongly signed, from the wrong pool, or belongs to a credential that has been disabled – yields this identical response. The gateway is configured to answer in the same application/problem+json shape as everything else, so you do not need a second parser for this status; what it cannot do is tell you which of those causes applied.

Media typeapplication/problem+json

RFC 9457 application/problem+json body. code is the published, stable, machine-readable field to branch your integration logic on – detail is a human-readable string that may be reworded over time and must not be parsed.

This table is the whole published set: every code this API can return appears below, and nothing below is unreachable. test/docs/openapi-matches-reality.test.ts compares the enum to the codes the handlers actually construct, so a code added to one side and not the other fails the build rather than shipping.

Published code values:

code	HTTP status	Meaning	Retry?
invalid_cursor	400	The cursor query parameter could not be decoded.	No – restart pagination with no cursor. Do not resend the same value.
invalid_site_id	400	The siteId filter is not a positive integer, or it names a site outside your grant. detail says which.	No – fix the parameter against GET /v1/me’s grantedSiteIds.
invalid_order_number	400	The order number in the path is not a positive integer.	No – fix the path.
invalid_product_id	400	The productId path segment on GET /v1/products/{productId} does not match the SLO_/SLS_-prefixed shape.	No – fix the path.
invalid_service_type	400	GET /v1/products’s serviceType filter is not one of the values this API can order (STOCK or POD).	No – fix the parameter.
updated_since_not_supported	400	An updatedSince parameter was sent. Rejected rather than ignored, on purpose – see “No updatedSince / no change polling” above.	No – remove the parameter; there is no change-polling mechanism to switch to.
invalid_request	400	POST /v1/orders’s request body failed validation – malformed JSON, a missing or malformed field, an unknown key, or a body-level rule such as partnerLineId uniqueness or a misplaced shipTo – or GET /v1/orders/submissions’s status/limit filter is malformed. detail names the exact violation.	No – fix the request.
invalid_submission_id	400	The submissionId path segment on GET /v1/orders/submissions/{submissionId} is not a well-formed UUID.	No – fix the path.
invalid_quantity	400	The quantity on POST /v1/products/{productId}/quote is missing or not a positive integer.	No – fix the request body.
invalid_shipping_quote_request	400	POST /v1/shipping/quote’s body failed validation – malformed JSON, a missing or mistyped field, an unknown key at the top level or inside shipTo, or a weightOunces outside 0 < w <= 5000000. detail names the field.	No – fix the request body.
invalid_item_number	400	The itemNumber path segment on a proof route is not a positive integer. It is the line’s itemNumber from GET /v1/orders/{orderNumber}/items, never a Collaterate internal id.	No – fix the path.
invalid_token	401	The credential is missing, expired, or invalid.	No – mint a new token, retry once, then investigate the credential.
insufficient_scope	403	The token lacks the scope required for this operation.	No – mint a token with the required scope.
order_not_found	404	No such order, or one that exists outside your granted sites (see above).	No.
order_item_not_found	404	No line matching (orderNumber, itemNumber) resolves for you – absent, outside your granted sites, or hidden from the customer, identically.	No.
product_not_found	404	No such product, or one that exists but belongs to a site outside your granted sites (same rule as order_not_found).	No.
quote_product_not_found	404	The product resolved in our own catalog but Collaterate could not price it. Rare.	No.
template_not_found	404	GET /v1/products/{productId}/template found no Chili template for this product – not TEMPLATE-classified, TEMPLATE-classified with a legacy EDOC/CANVA vendor, or Chili-templated with no document configured. All three identically.	No.
submission_not_found	404	No submission exists with this id for your credential – whether it never existed or belongs to another partner, identically.	No.
ordering_not_provisioned	409	POST /v1/orders’s siteId has no ordering user configured. This is set up per (partner, site) by staff at onboarding; a partner cannot provision it themselves.	No – ask Partner Integrations to provision an ordering user for the site, then retry.
partner_order_id_reused	409	POST /v1/orders’s partnerOrderId was already used, with a request body that does not match this one. Resending the identical body under the same partnerOrderId is safe and returns the original submission (see the operation description); reusing it for a materially different order is rejected instead of silently creating a second order.	No – use a new partnerOrderId, or resend the exact original body to poll the existing submission.
proof_not_pending_review	409	A proof approve or decline was sent for a line whose proofStatus is not PENDING_REVIEW – no proof yet, already decided, or a state this API does not recognise. detail says which. On a RETRY of a decision that already succeeded, this is the expected answer and means success.	No – read the line’s current proofStatus from GET /v1/orders/{orderNumber}/items.
order_item_cancelled	409	A proof approve or decline was sent for a cancelled line. It will never be produced, so its proof cannot be decided.	No.
quote_invalid	422	Collaterate rejected the quote on business-validation grounds (e.g. quantity over the product’s configured maximum). detail carries Collaterate’s own validation message.	No – fix the request body (e.g. reduce quantity).
unknown_country_code	422	POST /v1/shipping/quote’s shipTo.country is not a country code Collaterate recognises.	No – send a code Collaterate carries (US, CA, MX, …).
unknown_state_code	422	POST /v1/shipping/quote’s shipTo.state is not a state or province of the country you sent. State codes are resolved WITHIN the country, since they are not unique across countries.	No – fix the state, or the country it belongs to.
shipping_quote_unavailable	422	POST /v1/shipping/quote produced no priced service at all for that destination and weight. detail carries Collaterate’s own reasons when it gave any – an invalid postal code for the country is the common one – and says so plainly when it did not.	No – fix the destination. An empty result is never returned as a 200.
denial_reason_not_available	422	POST .../proof/decline’s reason is well-formed but is not a denial reason this line’s proof offers – including a code that is valid on a different line, and UNKNOWN, which never is. detail lists what is valid here.	No – pick a code from GET .../proof/denial-reasons for this line.
rate_limit_exceeded	429	Rate limit or daily quota exceeded.	Yes – honor Retry-After.
internal_error	500	Unexpected server-side failure. Detail is always the fixed string below, never the underlying error.	No, or with caution – if persistent, contact Partner Integrations.
service_unavailable	503	Transient failure – typically the database path, but also a Lambda that crashed, timed out, or hit its own concurrency limit before any handler ran.	Yes, with backoff.

Three statuses are answered by the API gateway before your request reaches application code: 401 (authorizer denial), 429 (usage-plan throttle), and 503 (the Lambda integration itself failed). All three are configured to return this same document with the codes above, so one parser and one branch on code covers every error this API produces. The 403 on GET /v1/ping is the sole exception anywhere in the API – it comes from the edge firewall, which is not ours to shape, and carries no problem document.

object

type

required

Always the literal string about:blank today; reserved by RFC 9457 for future use.

string

Allowed value: about:blank

title

required

Short, human-readable summary of the HTTP status (e.g. “Not Found”).

string

status

required

The HTTP status code, repeated in the body for convenience.

integer

code

required

Stable, machine-readable error identifier. Safe to branch on. See the table above.

string

Allowed values: all_segments_visible_reset_not_acknowledged artwork_reservation_not_usable audit_unavailable auto_assigned_segments_present credit_account_not_found cursor_not_supported_with_search denial_reason_not_available division_code_conflict division_create_requires_address division_not_found division_not_on_site division_parent_invalid image_not_found insufficient_scope internal_error invalid_active invalid_adjustment_type invalid_cursor invalid_credit_account_id invalid_division_id invalid_image_id invalid_image_patch invalid_item_number invalid_order_number invalid_product_id invalid_product_patch invalid_quantity invalid_query invalid_request invalid_segment_ids invalid_segments_body invalid_service_type invalid_shipping_quote_request invalid_site_id invalid_submission_id invalid_token invalid_user_id invalid_variant_id invalid_variant_patch monolith_rejected monolith_target_missing null_not_supported order_item_cancelled order_item_not_found order_not_found ordering_not_provisioned parent_is_self parent_not_on_site partner_order_id_reused product_not_found product_write_partially_applied proof_not_pending_review quote_invalid quote_product_not_found rate_limit_exceeded search_not_available segment_not_on_site service_unavailable shipping_quote_unavailable site_id_required_for_search site_not_found sls_null_backfills_master submission_not_found template_not_found unknown_country_code unknown_query_parameter unknown_state_code unsupported_field_for_service_type updated_since_not_supported user_already_exists user_not_found variant_not_site_addressable

detail

required

Human-readable explanation. Do not parse this – it may be reworded without notice.

string

requestId

required

Echoes the request’s id. Include this when contacting Partner Integrations about a specific failed call – it resolves directly to one log entry.

string

Example

{
  "type": "about:blank",
  "title": "Unauthorized",
  "status": 401,
  "code": "invalid_token",
  "detail": "The credential presented with this request is missing, expired, or invalid.",
  "requestId": "8f3c1e2a-..."
}

403

The credential is valid but lacks the scope required for this operation (for example, a token minted without partner-api/orders:read). Not retryable as-is – request a token with the required scope. Not to be confused with an out-of-scope order, which is a 404 (see above), or with the edge firewall’s 403 on /ping, which carries no problem document at all.

Media typeapplication/problem+json

RFC 9457 application/problem+json body. code is the published, stable, machine-readable field to branch your integration logic on – detail is a human-readable string that may be reworded over time and must not be parsed.

This table is the whole published set: every code this API can return appears below, and nothing below is unreachable. test/docs/openapi-matches-reality.test.ts compares the enum to the codes the handlers actually construct, so a code added to one side and not the other fails the build rather than shipping.

Published code values:

code	HTTP status	Meaning	Retry?
invalid_cursor	400	The cursor query parameter could not be decoded.	No – restart pagination with no cursor. Do not resend the same value.
invalid_site_id	400	The siteId filter is not a positive integer, or it names a site outside your grant. detail says which.	No – fix the parameter against GET /v1/me’s grantedSiteIds.
invalid_order_number	400	The order number in the path is not a positive integer.	No – fix the path.
invalid_product_id	400	The productId path segment on GET /v1/products/{productId} does not match the SLO_/SLS_-prefixed shape.	No – fix the path.
invalid_service_type	400	GET /v1/products’s serviceType filter is not one of the values this API can order (STOCK or POD).	No – fix the parameter.
updated_since_not_supported	400	An updatedSince parameter was sent. Rejected rather than ignored, on purpose – see “No updatedSince / no change polling” above.	No – remove the parameter; there is no change-polling mechanism to switch to.
invalid_request	400	POST /v1/orders’s request body failed validation – malformed JSON, a missing or malformed field, an unknown key, or a body-level rule such as partnerLineId uniqueness or a misplaced shipTo – or GET /v1/orders/submissions’s status/limit filter is malformed. detail names the exact violation.	No – fix the request.
invalid_submission_id	400	The submissionId path segment on GET /v1/orders/submissions/{submissionId} is not a well-formed UUID.	No – fix the path.
invalid_quantity	400	The quantity on POST /v1/products/{productId}/quote is missing or not a positive integer.	No – fix the request body.
invalid_shipping_quote_request	400	POST /v1/shipping/quote’s body failed validation – malformed JSON, a missing or mistyped field, an unknown key at the top level or inside shipTo, or a weightOunces outside 0 < w <= 5000000. detail names the field.	No – fix the request body.
invalid_item_number	400	The itemNumber path segment on a proof route is not a positive integer. It is the line’s itemNumber from GET /v1/orders/{orderNumber}/items, never a Collaterate internal id.	No – fix the path.
invalid_token	401	The credential is missing, expired, or invalid.	No – mint a new token, retry once, then investigate the credential.
insufficient_scope	403	The token lacks the scope required for this operation.	No – mint a token with the required scope.
order_not_found	404	No such order, or one that exists outside your granted sites (see above).	No.
order_item_not_found	404	No line matching (orderNumber, itemNumber) resolves for you – absent, outside your granted sites, or hidden from the customer, identically.	No.
product_not_found	404	No such product, or one that exists but belongs to a site outside your granted sites (same rule as order_not_found).	No.
quote_product_not_found	404	The product resolved in our own catalog but Collaterate could not price it. Rare.	No.
template_not_found	404	GET /v1/products/{productId}/template found no Chili template for this product – not TEMPLATE-classified, TEMPLATE-classified with a legacy EDOC/CANVA vendor, or Chili-templated with no document configured. All three identically.	No.
submission_not_found	404	No submission exists with this id for your credential – whether it never existed or belongs to another partner, identically.	No.
ordering_not_provisioned	409	POST /v1/orders’s siteId has no ordering user configured. This is set up per (partner, site) by staff at onboarding; a partner cannot provision it themselves.	No – ask Partner Integrations to provision an ordering user for the site, then retry.
partner_order_id_reused	409	POST /v1/orders’s partnerOrderId was already used, with a request body that does not match this one. Resending the identical body under the same partnerOrderId is safe and returns the original submission (see the operation description); reusing it for a materially different order is rejected instead of silently creating a second order.	No – use a new partnerOrderId, or resend the exact original body to poll the existing submission.
proof_not_pending_review	409	A proof approve or decline was sent for a line whose proofStatus is not PENDING_REVIEW – no proof yet, already decided, or a state this API does not recognise. detail says which. On a RETRY of a decision that already succeeded, this is the expected answer and means success.	No – read the line’s current proofStatus from GET /v1/orders/{orderNumber}/items.
order_item_cancelled	409	A proof approve or decline was sent for a cancelled line. It will never be produced, so its proof cannot be decided.	No.
quote_invalid	422	Collaterate rejected the quote on business-validation grounds (e.g. quantity over the product’s configured maximum). detail carries Collaterate’s own validation message.	No – fix the request body (e.g. reduce quantity).
unknown_country_code	422	POST /v1/shipping/quote’s shipTo.country is not a country code Collaterate recognises.	No – send a code Collaterate carries (US, CA, MX, …).
unknown_state_code	422	POST /v1/shipping/quote’s shipTo.state is not a state or province of the country you sent. State codes are resolved WITHIN the country, since they are not unique across countries.	No – fix the state, or the country it belongs to.
shipping_quote_unavailable	422	POST /v1/shipping/quote produced no priced service at all for that destination and weight. detail carries Collaterate’s own reasons when it gave any – an invalid postal code for the country is the common one – and says so plainly when it did not.	No – fix the destination. An empty result is never returned as a 200.
denial_reason_not_available	422	POST .../proof/decline’s reason is well-formed but is not a denial reason this line’s proof offers – including a code that is valid on a different line, and UNKNOWN, which never is. detail lists what is valid here.	No – pick a code from GET .../proof/denial-reasons for this line.
rate_limit_exceeded	429	Rate limit or daily quota exceeded.	Yes – honor Retry-After.
internal_error	500	Unexpected server-side failure. Detail is always the fixed string below, never the underlying error.	No, or with caution – if persistent, contact Partner Integrations.
service_unavailable	503	Transient failure – typically the database path, but also a Lambda that crashed, timed out, or hit its own concurrency limit before any handler ran.	Yes, with backoff.

Three statuses are answered by the API gateway before your request reaches application code: 401 (authorizer denial), 429 (usage-plan throttle), and 503 (the Lambda integration itself failed). All three are configured to return this same document with the codes above, so one parser and one branch on code covers every error this API produces. The 403 on GET /v1/ping is the sole exception anywhere in the API – it comes from the edge firewall, which is not ours to shape, and carries no problem document.

object

type

required

Always the literal string about:blank today; reserved by RFC 9457 for future use.

string

Allowed value: about:blank

title

required

Short, human-readable summary of the HTTP status (e.g. “Not Found”).

string

status

required

The HTTP status code, repeated in the body for convenience.

integer

code

required

Stable, machine-readable error identifier. Safe to branch on. See the table above.

string

Allowed values: all_segments_visible_reset_not_acknowledged artwork_reservation_not_usable audit_unavailable auto_assigned_segments_present credit_account_not_found cursor_not_supported_with_search denial_reason_not_available division_code_conflict division_create_requires_address division_not_found division_not_on_site division_parent_invalid image_not_found insufficient_scope internal_error invalid_active invalid_adjustment_type invalid_cursor invalid_credit_account_id invalid_division_id invalid_image_id invalid_image_patch invalid_item_number invalid_order_number invalid_product_id invalid_product_patch invalid_quantity invalid_query invalid_request invalid_segment_ids invalid_segments_body invalid_service_type invalid_shipping_quote_request invalid_site_id invalid_submission_id invalid_token invalid_user_id invalid_variant_id invalid_variant_patch monolith_rejected monolith_target_missing null_not_supported order_item_cancelled order_item_not_found order_not_found ordering_not_provisioned parent_is_self parent_not_on_site partner_order_id_reused product_not_found product_write_partially_applied proof_not_pending_review quote_invalid quote_product_not_found rate_limit_exceeded search_not_available segment_not_on_site service_unavailable shipping_quote_unavailable site_id_required_for_search site_not_found sls_null_backfills_master submission_not_found template_not_found unknown_country_code unknown_query_parameter unknown_state_code unsupported_field_for_service_type updated_since_not_supported user_already_exists user_not_found variant_not_site_addressable

detail

required

Human-readable explanation. Do not parse this – it may be reworded without notice.

string

requestId

required

Echoes the request’s id. Include this when contacting Partner Integrations about a specific failed call – it resolves directly to one log entry.

string

Example

{
  "type": "about:blank",
  "title": "Forbidden",
  "status": 403,
  "code": "insufficient_scope",
  "detail": "This request requires the \"partner-api/orders:read\" scope.",
  "requestId": "8f3c1e2a-..."
}

404

No such product, OR a product that exists but belongs to a site outside your granted sites. These two cases are indistinguishable on purpose, the same rule order_not_found applies. Not retryable as-is.

Media typeapplication/problem+json

RFC 9457 application/problem+json body. code is the published, stable, machine-readable field to branch your integration logic on – detail is a human-readable string that may be reworded over time and must not be parsed.

This table is the whole published set: every code this API can return appears below, and nothing below is unreachable. test/docs/openapi-matches-reality.test.ts compares the enum to the codes the handlers actually construct, so a code added to one side and not the other fails the build rather than shipping.

Published code values:

code	HTTP status	Meaning	Retry?
invalid_cursor	400	The cursor query parameter could not be decoded.	No – restart pagination with no cursor. Do not resend the same value.
invalid_site_id	400	The siteId filter is not a positive integer, or it names a site outside your grant. detail says which.	No – fix the parameter against GET /v1/me’s grantedSiteIds.
invalid_order_number	400	The order number in the path is not a positive integer.	No – fix the path.
invalid_product_id	400	The productId path segment on GET /v1/products/{productId} does not match the SLO_/SLS_-prefixed shape.	No – fix the path.
invalid_service_type	400	GET /v1/products’s serviceType filter is not one of the values this API can order (STOCK or POD).	No – fix the parameter.
updated_since_not_supported	400	An updatedSince parameter was sent. Rejected rather than ignored, on purpose – see “No updatedSince / no change polling” above.	No – remove the parameter; there is no change-polling mechanism to switch to.
invalid_request	400	POST /v1/orders’s request body failed validation – malformed JSON, a missing or malformed field, an unknown key, or a body-level rule such as partnerLineId uniqueness or a misplaced shipTo – or GET /v1/orders/submissions’s status/limit filter is malformed. detail names the exact violation.	No – fix the request.
invalid_submission_id	400	The submissionId path segment on GET /v1/orders/submissions/{submissionId} is not a well-formed UUID.	No – fix the path.
invalid_quantity	400	The quantity on POST /v1/products/{productId}/quote is missing or not a positive integer.	No – fix the request body.
invalid_shipping_quote_request	400	POST /v1/shipping/quote’s body failed validation – malformed JSON, a missing or mistyped field, an unknown key at the top level or inside shipTo, or a weightOunces outside 0 < w <= 5000000. detail names the field.	No – fix the request body.
invalid_item_number	400	The itemNumber path segment on a proof route is not a positive integer. It is the line’s itemNumber from GET /v1/orders/{orderNumber}/items, never a Collaterate internal id.	No – fix the path.
invalid_token	401	The credential is missing, expired, or invalid.	No – mint a new token, retry once, then investigate the credential.
insufficient_scope	403	The token lacks the scope required for this operation.	No – mint a token with the required scope.
order_not_found	404	No such order, or one that exists outside your granted sites (see above).	No.
order_item_not_found	404	No line matching (orderNumber, itemNumber) resolves for you – absent, outside your granted sites, or hidden from the customer, identically.	No.
product_not_found	404	No such product, or one that exists but belongs to a site outside your granted sites (same rule as order_not_found).	No.
quote_product_not_found	404	The product resolved in our own catalog but Collaterate could not price it. Rare.	No.
template_not_found	404	GET /v1/products/{productId}/template found no Chili template for this product – not TEMPLATE-classified, TEMPLATE-classified with a legacy EDOC/CANVA vendor, or Chili-templated with no document configured. All three identically.	No.
submission_not_found	404	No submission exists with this id for your credential – whether it never existed or belongs to another partner, identically.	No.
ordering_not_provisioned	409	POST /v1/orders’s siteId has no ordering user configured. This is set up per (partner, site) by staff at onboarding; a partner cannot provision it themselves.	No – ask Partner Integrations to provision an ordering user for the site, then retry.
partner_order_id_reused	409	POST /v1/orders’s partnerOrderId was already used, with a request body that does not match this one. Resending the identical body under the same partnerOrderId is safe and returns the original submission (see the operation description); reusing it for a materially different order is rejected instead of silently creating a second order.	No – use a new partnerOrderId, or resend the exact original body to poll the existing submission.
proof_not_pending_review	409	A proof approve or decline was sent for a line whose proofStatus is not PENDING_REVIEW – no proof yet, already decided, or a state this API does not recognise. detail says which. On a RETRY of a decision that already succeeded, this is the expected answer and means success.	No – read the line’s current proofStatus from GET /v1/orders/{orderNumber}/items.
order_item_cancelled	409	A proof approve or decline was sent for a cancelled line. It will never be produced, so its proof cannot be decided.	No.
quote_invalid	422	Collaterate rejected the quote on business-validation grounds (e.g. quantity over the product’s configured maximum). detail carries Collaterate’s own validation message.	No – fix the request body (e.g. reduce quantity).
unknown_country_code	422	POST /v1/shipping/quote’s shipTo.country is not a country code Collaterate recognises.	No – send a code Collaterate carries (US, CA, MX, …).
unknown_state_code	422	POST /v1/shipping/quote’s shipTo.state is not a state or province of the country you sent. State codes are resolved WITHIN the country, since they are not unique across countries.	No – fix the state, or the country it belongs to.
shipping_quote_unavailable	422	POST /v1/shipping/quote produced no priced service at all for that destination and weight. detail carries Collaterate’s own reasons when it gave any – an invalid postal code for the country is the common one – and says so plainly when it did not.	No – fix the destination. An empty result is never returned as a 200.
denial_reason_not_available	422	POST .../proof/decline’s reason is well-formed but is not a denial reason this line’s proof offers – including a code that is valid on a different line, and UNKNOWN, which never is. detail lists what is valid here.	No – pick a code from GET .../proof/denial-reasons for this line.
rate_limit_exceeded	429	Rate limit or daily quota exceeded.	Yes – honor Retry-After.
internal_error	500	Unexpected server-side failure. Detail is always the fixed string below, never the underlying error.	No, or with caution – if persistent, contact Partner Integrations.
service_unavailable	503	Transient failure – typically the database path, but also a Lambda that crashed, timed out, or hit its own concurrency limit before any handler ran.	Yes, with backoff.

Three statuses are answered by the API gateway before your request reaches application code: 401 (authorizer denial), 429 (usage-plan throttle), and 503 (the Lambda integration itself failed). All three are configured to return this same document with the codes above, so one parser and one branch on code covers every error this API produces. The 403 on GET /v1/ping is the sole exception anywhere in the API – it comes from the edge firewall, which is not ours to shape, and carries no problem document.

object

type

required

Always the literal string about:blank today; reserved by RFC 9457 for future use.

string

Allowed value: about:blank

title

required

Short, human-readable summary of the HTTP status (e.g. “Not Found”).

string

status

required

The HTTP status code, repeated in the body for convenience.

integer

code

required

Stable, machine-readable error identifier. Safe to branch on. See the table above.

string

Allowed values: all_segments_visible_reset_not_acknowledged artwork_reservation_not_usable audit_unavailable auto_assigned_segments_present credit_account_not_found cursor_not_supported_with_search denial_reason_not_available division_code_conflict division_create_requires_address division_not_found division_not_on_site division_parent_invalid image_not_found insufficient_scope internal_error invalid_active invalid_adjustment_type invalid_cursor invalid_credit_account_id invalid_division_id invalid_image_id invalid_image_patch invalid_item_number invalid_order_number invalid_product_id invalid_product_patch invalid_quantity invalid_query invalid_request invalid_segment_ids invalid_segments_body invalid_service_type invalid_shipping_quote_request invalid_site_id invalid_submission_id invalid_token invalid_user_id invalid_variant_id invalid_variant_patch monolith_rejected monolith_target_missing null_not_supported order_item_cancelled order_item_not_found order_not_found ordering_not_provisioned parent_is_self parent_not_on_site partner_order_id_reused product_not_found product_write_partially_applied proof_not_pending_review quote_invalid quote_product_not_found rate_limit_exceeded search_not_available segment_not_on_site service_unavailable shipping_quote_unavailable site_id_required_for_search site_not_found sls_null_backfills_master submission_not_found template_not_found unknown_country_code unknown_query_parameter unknown_state_code unsupported_field_for_service_type updated_since_not_supported user_already_exists user_not_found variant_not_site_addressable

detail

required

Human-readable explanation. Do not parse this – it may be reworded without notice.

string

requestId

required

Echoes the request’s id. Include this when contacting Partner Integrations about a specific failed call – it resolves directly to one log entry.

string

Example

{
  "type": "about:blank",
  "title": "Not Found",
  "status": 404,
  "code": "product_not_found",
  "detail": "No product was found matching the request.",
  "requestId": "8f3c1e2a-..."
}

409

The upstream system no longer has this product although the catalog still lists it (monolith_target_missing).

Media typeapplication/problem+json

RFC 9457 application/problem+json body. code is the published, stable, machine-readable field to branch your integration logic on – detail is a human-readable string that may be reworded over time and must not be parsed.

This table is the whole published set: every code this API can return appears below, and nothing below is unreachable. test/docs/openapi-matches-reality.test.ts compares the enum to the codes the handlers actually construct, so a code added to one side and not the other fails the build rather than shipping.

Published code values:

code	HTTP status	Meaning	Retry?
invalid_cursor	400	The cursor query parameter could not be decoded.	No – restart pagination with no cursor. Do not resend the same value.
invalid_site_id	400	The siteId filter is not a positive integer, or it names a site outside your grant. detail says which.	No – fix the parameter against GET /v1/me’s grantedSiteIds.
invalid_order_number	400	The order number in the path is not a positive integer.	No – fix the path.
invalid_product_id	400	The productId path segment on GET /v1/products/{productId} does not match the SLO_/SLS_-prefixed shape.	No – fix the path.
invalid_service_type	400	GET /v1/products’s serviceType filter is not one of the values this API can order (STOCK or POD).	No – fix the parameter.
updated_since_not_supported	400	An updatedSince parameter was sent. Rejected rather than ignored, on purpose – see “No updatedSince / no change polling” above.	No – remove the parameter; there is no change-polling mechanism to switch to.
invalid_request	400	POST /v1/orders’s request body failed validation – malformed JSON, a missing or malformed field, an unknown key, or a body-level rule such as partnerLineId uniqueness or a misplaced shipTo – or GET /v1/orders/submissions’s status/limit filter is malformed. detail names the exact violation.	No – fix the request.
invalid_submission_id	400	The submissionId path segment on GET /v1/orders/submissions/{submissionId} is not a well-formed UUID.	No – fix the path.
invalid_quantity	400	The quantity on POST /v1/products/{productId}/quote is missing or not a positive integer.	No – fix the request body.
invalid_shipping_quote_request	400	POST /v1/shipping/quote’s body failed validation – malformed JSON, a missing or mistyped field, an unknown key at the top level or inside shipTo, or a weightOunces outside 0 < w <= 5000000. detail names the field.	No – fix the request body.
invalid_item_number	400	The itemNumber path segment on a proof route is not a positive integer. It is the line’s itemNumber from GET /v1/orders/{orderNumber}/items, never a Collaterate internal id.	No – fix the path.
invalid_token	401	The credential is missing, expired, or invalid.	No – mint a new token, retry once, then investigate the credential.
insufficient_scope	403	The token lacks the scope required for this operation.	No – mint a token with the required scope.
order_not_found	404	No such order, or one that exists outside your granted sites (see above).	No.
order_item_not_found	404	No line matching (orderNumber, itemNumber) resolves for you – absent, outside your granted sites, or hidden from the customer, identically.	No.
product_not_found	404	No such product, or one that exists but belongs to a site outside your granted sites (same rule as order_not_found).	No.
quote_product_not_found	404	The product resolved in our own catalog but Collaterate could not price it. Rare.	No.
template_not_found	404	GET /v1/products/{productId}/template found no Chili template for this product – not TEMPLATE-classified, TEMPLATE-classified with a legacy EDOC/CANVA vendor, or Chili-templated with no document configured. All three identically.	No.
submission_not_found	404	No submission exists with this id for your credential – whether it never existed or belongs to another partner, identically.	No.
ordering_not_provisioned	409	POST /v1/orders’s siteId has no ordering user configured. This is set up per (partner, site) by staff at onboarding; a partner cannot provision it themselves.	No – ask Partner Integrations to provision an ordering user for the site, then retry.
partner_order_id_reused	409	POST /v1/orders’s partnerOrderId was already used, with a request body that does not match this one. Resending the identical body under the same partnerOrderId is safe and returns the original submission (see the operation description); reusing it for a materially different order is rejected instead of silently creating a second order.	No – use a new partnerOrderId, or resend the exact original body to poll the existing submission.
proof_not_pending_review	409	A proof approve or decline was sent for a line whose proofStatus is not PENDING_REVIEW – no proof yet, already decided, or a state this API does not recognise. detail says which. On a RETRY of a decision that already succeeded, this is the expected answer and means success.	No – read the line’s current proofStatus from GET /v1/orders/{orderNumber}/items.
order_item_cancelled	409	A proof approve or decline was sent for a cancelled line. It will never be produced, so its proof cannot be decided.	No.
quote_invalid	422	Collaterate rejected the quote on business-validation grounds (e.g. quantity over the product’s configured maximum). detail carries Collaterate’s own validation message.	No – fix the request body (e.g. reduce quantity).
unknown_country_code	422	POST /v1/shipping/quote’s shipTo.country is not a country code Collaterate recognises.	No – send a code Collaterate carries (US, CA, MX, …).
unknown_state_code	422	POST /v1/shipping/quote’s shipTo.state is not a state or province of the country you sent. State codes are resolved WITHIN the country, since they are not unique across countries.	No – fix the state, or the country it belongs to.
shipping_quote_unavailable	422	POST /v1/shipping/quote produced no priced service at all for that destination and weight. detail carries Collaterate’s own reasons when it gave any – an invalid postal code for the country is the common one – and says so plainly when it did not.	No – fix the destination. An empty result is never returned as a 200.
denial_reason_not_available	422	POST .../proof/decline’s reason is well-formed but is not a denial reason this line’s proof offers – including a code that is valid on a different line, and UNKNOWN, which never is. detail lists what is valid here.	No – pick a code from GET .../proof/denial-reasons for this line.
rate_limit_exceeded	429	Rate limit or daily quota exceeded.	Yes – honor Retry-After.
internal_error	500	Unexpected server-side failure. Detail is always the fixed string below, never the underlying error.	No, or with caution – if persistent, contact Partner Integrations.
service_unavailable	503	Transient failure – typically the database path, but also a Lambda that crashed, timed out, or hit its own concurrency limit before any handler ran.	Yes, with backoff.

Three statuses are answered by the API gateway before your request reaches application code: 401 (authorizer denial), 429 (usage-plan throttle), and 503 (the Lambda integration itself failed). All three are configured to return this same document with the codes above, so one parser and one branch on code covers every error this API produces. The 403 on GET /v1/ping is the sole exception anywhere in the API – it comes from the edge firewall, which is not ours to shape, and carries no problem document.

object

type

required

Always the literal string about:blank today; reserved by RFC 9457 for future use.

string

Allowed value: about:blank

title

required

Short, human-readable summary of the HTTP status (e.g. “Not Found”).

string

status

required

The HTTP status code, repeated in the body for convenience.

integer

code

required

Stable, machine-readable error identifier. Safe to branch on. See the table above.

string

Allowed values: all_segments_visible_reset_not_acknowledged artwork_reservation_not_usable audit_unavailable auto_assigned_segments_present credit_account_not_found cursor_not_supported_with_search denial_reason_not_available division_code_conflict division_create_requires_address division_not_found division_not_on_site division_parent_invalid image_not_found insufficient_scope internal_error invalid_active invalid_adjustment_type invalid_cursor invalid_credit_account_id invalid_division_id invalid_image_id invalid_image_patch invalid_item_number invalid_order_number invalid_product_id invalid_product_patch invalid_quantity invalid_query invalid_request invalid_segment_ids invalid_segments_body invalid_service_type invalid_shipping_quote_request invalid_site_id invalid_submission_id invalid_token invalid_user_id invalid_variant_id invalid_variant_patch monolith_rejected monolith_target_missing null_not_supported order_item_cancelled order_item_not_found order_not_found ordering_not_provisioned parent_is_self parent_not_on_site partner_order_id_reused product_not_found product_write_partially_applied proof_not_pending_review quote_invalid quote_product_not_found rate_limit_exceeded search_not_available segment_not_on_site service_unavailable shipping_quote_unavailable site_id_required_for_search site_not_found sls_null_backfills_master submission_not_found template_not_found unknown_country_code unknown_query_parameter unknown_state_code unsupported_field_for_service_type updated_since_not_supported user_already_exists user_not_found variant_not_site_addressable

detail

required

Human-readable explanation. Do not parse this – it may be reworded without notice.

string

requestId

required

Echoes the request’s id. Include this when contacting Partner Integrations about a specific failed call – it resolves directly to one log entry.

string

Example

{
  "type": "about:blank",
  "title": "Conflict",
  "status": 409,
  "code": "monolith_target_missing",
  "detail": "The upstream system no longer has this target.",
  "requestId": "8f3c1e2a-..."
}

429

Your rate limit or daily quota was exceeded. Retryable – honor the Retry-After header (seconds) before your next attempt.

Like the 401, this comes from the gateway’s usage plan rather than from application code, and is configured to carry the same problem document as every other error so a single parser covers the whole API.

Media typeapplication/problem+json

RFC 9457 application/problem+json body. code is the published, stable, machine-readable field to branch your integration logic on – detail is a human-readable string that may be reworded over time and must not be parsed.

This table is the whole published set: every code this API can return appears below, and nothing below is unreachable. test/docs/openapi-matches-reality.test.ts compares the enum to the codes the handlers actually construct, so a code added to one side and not the other fails the build rather than shipping.

Published code values:

code	HTTP status	Meaning	Retry?
invalid_cursor	400	The cursor query parameter could not be decoded.	No – restart pagination with no cursor. Do not resend the same value.
invalid_site_id	400	The siteId filter is not a positive integer, or it names a site outside your grant. detail says which.	No – fix the parameter against GET /v1/me’s grantedSiteIds.
invalid_order_number	400	The order number in the path is not a positive integer.	No – fix the path.
invalid_product_id	400	The productId path segment on GET /v1/products/{productId} does not match the SLO_/SLS_-prefixed shape.	No – fix the path.
invalid_service_type	400	GET /v1/products’s serviceType filter is not one of the values this API can order (STOCK or POD).	No – fix the parameter.
updated_since_not_supported	400	An updatedSince parameter was sent. Rejected rather than ignored, on purpose – see “No updatedSince / no change polling” above.	No – remove the parameter; there is no change-polling mechanism to switch to.
invalid_request	400	POST /v1/orders’s request body failed validation – malformed JSON, a missing or malformed field, an unknown key, or a body-level rule such as partnerLineId uniqueness or a misplaced shipTo – or GET /v1/orders/submissions’s status/limit filter is malformed. detail names the exact violation.	No – fix the request.
invalid_submission_id	400	The submissionId path segment on GET /v1/orders/submissions/{submissionId} is not a well-formed UUID.	No – fix the path.
invalid_quantity	400	The quantity on POST /v1/products/{productId}/quote is missing or not a positive integer.	No – fix the request body.
invalid_shipping_quote_request	400	POST /v1/shipping/quote’s body failed validation – malformed JSON, a missing or mistyped field, an unknown key at the top level or inside shipTo, or a weightOunces outside 0 < w <= 5000000. detail names the field.	No – fix the request body.
invalid_item_number	400	The itemNumber path segment on a proof route is not a positive integer. It is the line’s itemNumber from GET /v1/orders/{orderNumber}/items, never a Collaterate internal id.	No – fix the path.
invalid_token	401	The credential is missing, expired, or invalid.	No – mint a new token, retry once, then investigate the credential.
insufficient_scope	403	The token lacks the scope required for this operation.	No – mint a token with the required scope.
order_not_found	404	No such order, or one that exists outside your granted sites (see above).	No.
order_item_not_found	404	No line matching (orderNumber, itemNumber) resolves for you – absent, outside your granted sites, or hidden from the customer, identically.	No.
product_not_found	404	No such product, or one that exists but belongs to a site outside your granted sites (same rule as order_not_found).	No.
quote_product_not_found	404	The product resolved in our own catalog but Collaterate could not price it. Rare.	No.
template_not_found	404	GET /v1/products/{productId}/template found no Chili template for this product – not TEMPLATE-classified, TEMPLATE-classified with a legacy EDOC/CANVA vendor, or Chili-templated with no document configured. All three identically.	No.
submission_not_found	404	No submission exists with this id for your credential – whether it never existed or belongs to another partner, identically.	No.
ordering_not_provisioned	409	POST /v1/orders’s siteId has no ordering user configured. This is set up per (partner, site) by staff at onboarding; a partner cannot provision it themselves.	No – ask Partner Integrations to provision an ordering user for the site, then retry.
partner_order_id_reused	409	POST /v1/orders’s partnerOrderId was already used, with a request body that does not match this one. Resending the identical body under the same partnerOrderId is safe and returns the original submission (see the operation description); reusing it for a materially different order is rejected instead of silently creating a second order.	No – use a new partnerOrderId, or resend the exact original body to poll the existing submission.
proof_not_pending_review	409	A proof approve or decline was sent for a line whose proofStatus is not PENDING_REVIEW – no proof yet, already decided, or a state this API does not recognise. detail says which. On a RETRY of a decision that already succeeded, this is the expected answer and means success.	No – read the line’s current proofStatus from GET /v1/orders/{orderNumber}/items.
order_item_cancelled	409	A proof approve or decline was sent for a cancelled line. It will never be produced, so its proof cannot be decided.	No.
quote_invalid	422	Collaterate rejected the quote on business-validation grounds (e.g. quantity over the product’s configured maximum). detail carries Collaterate’s own validation message.	No – fix the request body (e.g. reduce quantity).
unknown_country_code	422	POST /v1/shipping/quote’s shipTo.country is not a country code Collaterate recognises.	No – send a code Collaterate carries (US, CA, MX, …).
unknown_state_code	422	POST /v1/shipping/quote’s shipTo.state is not a state or province of the country you sent. State codes are resolved WITHIN the country, since they are not unique across countries.	No – fix the state, or the country it belongs to.
shipping_quote_unavailable	422	POST /v1/shipping/quote produced no priced service at all for that destination and weight. detail carries Collaterate’s own reasons when it gave any – an invalid postal code for the country is the common one – and says so plainly when it did not.	No – fix the destination. An empty result is never returned as a 200.
denial_reason_not_available	422	POST .../proof/decline’s reason is well-formed but is not a denial reason this line’s proof offers – including a code that is valid on a different line, and UNKNOWN, which never is. detail lists what is valid here.	No – pick a code from GET .../proof/denial-reasons for this line.
rate_limit_exceeded	429	Rate limit or daily quota exceeded.	Yes – honor Retry-After.
internal_error	500	Unexpected server-side failure. Detail is always the fixed string below, never the underlying error.	No, or with caution – if persistent, contact Partner Integrations.
service_unavailable	503	Transient failure – typically the database path, but also a Lambda that crashed, timed out, or hit its own concurrency limit before any handler ran.	Yes, with backoff.

Three statuses are answered by the API gateway before your request reaches application code: 401 (authorizer denial), 429 (usage-plan throttle), and 503 (the Lambda integration itself failed). All three are configured to return this same document with the codes above, so one parser and one branch on code covers every error this API produces. The 403 on GET /v1/ping is the sole exception anywhere in the API – it comes from the edge firewall, which is not ours to shape, and carries no problem document.

object

type

required

Always the literal string about:blank today; reserved by RFC 9457 for future use.

string

Allowed value: about:blank

title

required

Short, human-readable summary of the HTTP status (e.g. “Not Found”).

string

status

required

The HTTP status code, repeated in the body for convenience.

integer

code

required

Stable, machine-readable error identifier. Safe to branch on. See the table above.

string

Allowed values: all_segments_visible_reset_not_acknowledged artwork_reservation_not_usable audit_unavailable auto_assigned_segments_present credit_account_not_found cursor_not_supported_with_search denial_reason_not_available division_code_conflict division_create_requires_address division_not_found division_not_on_site division_parent_invalid image_not_found insufficient_scope internal_error invalid_active invalid_adjustment_type invalid_cursor invalid_credit_account_id invalid_division_id invalid_image_id invalid_image_patch invalid_item_number invalid_order_number invalid_product_id invalid_product_patch invalid_quantity invalid_query invalid_request invalid_segment_ids invalid_segments_body invalid_service_type invalid_shipping_quote_request invalid_site_id invalid_submission_id invalid_token invalid_user_id invalid_variant_id invalid_variant_patch monolith_rejected monolith_target_missing null_not_supported order_item_cancelled order_item_not_found order_not_found ordering_not_provisioned parent_is_self parent_not_on_site partner_order_id_reused product_not_found product_write_partially_applied proof_not_pending_review quote_invalid quote_product_not_found rate_limit_exceeded search_not_available segment_not_on_site service_unavailable shipping_quote_unavailable site_id_required_for_search site_not_found sls_null_backfills_master submission_not_found template_not_found unknown_country_code unknown_query_parameter unknown_state_code unsupported_field_for_service_type updated_since_not_supported user_already_exists user_not_found variant_not_site_addressable

detail

required

Human-readable explanation. Do not parse this – it may be reworded without notice.

string

requestId

required

Echoes the request’s id. Include this when contacting Partner Integrations about a specific failed call – it resolves directly to one log entry.

string

Example

{
  "type": "about:blank",
  "title": "Too Many Requests",
  "status": 429,
  "code": "rate_limit_exceeded",
  "detail": "The request rate limit has been exceeded. Retry after the indicated delay.",
  "requestId": "8f3c1e2a-..."
}

Headers

Retry-After

integer

Seconds to wait before retrying.

500

An unexpected server-side failure. detail is always the fixed string below and never the underlying error – a database message quoted back to a partner is a disclosure, so nothing is interpolated into it. The requestId resolves to the log entry that does carry the cause; send it to Partner Integrations rather than guessing.

Media typeapplication/problem+json

RFC 9457 application/problem+json body. code is the published, stable, machine-readable field to branch your integration logic on – detail is a human-readable string that may be reworded over time and must not be parsed.

This table is the whole published set: every code this API can return appears below, and nothing below is unreachable. test/docs/openapi-matches-reality.test.ts compares the enum to the codes the handlers actually construct, so a code added to one side and not the other fails the build rather than shipping.

Published code values:

code	HTTP status	Meaning	Retry?
invalid_cursor	400	The cursor query parameter could not be decoded.	No – restart pagination with no cursor. Do not resend the same value.
invalid_site_id	400	The siteId filter is not a positive integer, or it names a site outside your grant. detail says which.	No – fix the parameter against GET /v1/me’s grantedSiteIds.
invalid_order_number	400	The order number in the path is not a positive integer.	No – fix the path.
invalid_product_id	400	The productId path segment on GET /v1/products/{productId} does not match the SLO_/SLS_-prefixed shape.	No – fix the path.
invalid_service_type	400	GET /v1/products’s serviceType filter is not one of the values this API can order (STOCK or POD).	No – fix the parameter.
updated_since_not_supported	400	An updatedSince parameter was sent. Rejected rather than ignored, on purpose – see “No updatedSince / no change polling” above.	No – remove the parameter; there is no change-polling mechanism to switch to.
invalid_request	400	POST /v1/orders’s request body failed validation – malformed JSON, a missing or malformed field, an unknown key, or a body-level rule such as partnerLineId uniqueness or a misplaced shipTo – or GET /v1/orders/submissions’s status/limit filter is malformed. detail names the exact violation.	No – fix the request.
invalid_submission_id	400	The submissionId path segment on GET /v1/orders/submissions/{submissionId} is not a well-formed UUID.	No – fix the path.
invalid_quantity	400	The quantity on POST /v1/products/{productId}/quote is missing or not a positive integer.	No – fix the request body.
invalid_shipping_quote_request	400	POST /v1/shipping/quote’s body failed validation – malformed JSON, a missing or mistyped field, an unknown key at the top level or inside shipTo, or a weightOunces outside 0 < w <= 5000000. detail names the field.	No – fix the request body.
invalid_item_number	400	The itemNumber path segment on a proof route is not a positive integer. It is the line’s itemNumber from GET /v1/orders/{orderNumber}/items, never a Collaterate internal id.	No – fix the path.
invalid_token	401	The credential is missing, expired, or invalid.	No – mint a new token, retry once, then investigate the credential.
insufficient_scope	403	The token lacks the scope required for this operation.	No – mint a token with the required scope.
order_not_found	404	No such order, or one that exists outside your granted sites (see above).	No.
order_item_not_found	404	No line matching (orderNumber, itemNumber) resolves for you – absent, outside your granted sites, or hidden from the customer, identically.	No.
product_not_found	404	No such product, or one that exists but belongs to a site outside your granted sites (same rule as order_not_found).	No.
quote_product_not_found	404	The product resolved in our own catalog but Collaterate could not price it. Rare.	No.
template_not_found	404	GET /v1/products/{productId}/template found no Chili template for this product – not TEMPLATE-classified, TEMPLATE-classified with a legacy EDOC/CANVA vendor, or Chili-templated with no document configured. All three identically.	No.
submission_not_found	404	No submission exists with this id for your credential – whether it never existed or belongs to another partner, identically.	No.
ordering_not_provisioned	409	POST /v1/orders’s siteId has no ordering user configured. This is set up per (partner, site) by staff at onboarding; a partner cannot provision it themselves.	No – ask Partner Integrations to provision an ordering user for the site, then retry.
partner_order_id_reused	409	POST /v1/orders’s partnerOrderId was already used, with a request body that does not match this one. Resending the identical body under the same partnerOrderId is safe and returns the original submission (see the operation description); reusing it for a materially different order is rejected instead of silently creating a second order.	No – use a new partnerOrderId, or resend the exact original body to poll the existing submission.
proof_not_pending_review	409	A proof approve or decline was sent for a line whose proofStatus is not PENDING_REVIEW – no proof yet, already decided, or a state this API does not recognise. detail says which. On a RETRY of a decision that already succeeded, this is the expected answer and means success.	No – read the line’s current proofStatus from GET /v1/orders/{orderNumber}/items.
order_item_cancelled	409	A proof approve or decline was sent for a cancelled line. It will never be produced, so its proof cannot be decided.	No.
quote_invalid	422	Collaterate rejected the quote on business-validation grounds (e.g. quantity over the product’s configured maximum). detail carries Collaterate’s own validation message.	No – fix the request body (e.g. reduce quantity).
unknown_country_code	422	POST /v1/shipping/quote’s shipTo.country is not a country code Collaterate recognises.	No – send a code Collaterate carries (US, CA, MX, …).
unknown_state_code	422	POST /v1/shipping/quote’s shipTo.state is not a state or province of the country you sent. State codes are resolved WITHIN the country, since they are not unique across countries.	No – fix the state, or the country it belongs to.
shipping_quote_unavailable	422	POST /v1/shipping/quote produced no priced service at all for that destination and weight. detail carries Collaterate’s own reasons when it gave any – an invalid postal code for the country is the common one – and says so plainly when it did not.	No – fix the destination. An empty result is never returned as a 200.
denial_reason_not_available	422	POST .../proof/decline’s reason is well-formed but is not a denial reason this line’s proof offers – including a code that is valid on a different line, and UNKNOWN, which never is. detail lists what is valid here.	No – pick a code from GET .../proof/denial-reasons for this line.
rate_limit_exceeded	429	Rate limit or daily quota exceeded.	Yes – honor Retry-After.
internal_error	500	Unexpected server-side failure. Detail is always the fixed string below, never the underlying error.	No, or with caution – if persistent, contact Partner Integrations.
service_unavailable	503	Transient failure – typically the database path, but also a Lambda that crashed, timed out, or hit its own concurrency limit before any handler ran.	Yes, with backoff.

Three statuses are answered by the API gateway before your request reaches application code: 401 (authorizer denial), 429 (usage-plan throttle), and 503 (the Lambda integration itself failed). All three are configured to return this same document with the codes above, so one parser and one branch on code covers every error this API produces. The 403 on GET /v1/ping is the sole exception anywhere in the API – it comes from the edge firewall, which is not ours to shape, and carries no problem document.

object

type

required

Always the literal string about:blank today; reserved by RFC 9457 for future use.

string

Allowed value: about:blank

title

required

Short, human-readable summary of the HTTP status (e.g. “Not Found”).

string

status

required

The HTTP status code, repeated in the body for convenience.

integer

code

required

Stable, machine-readable error identifier. Safe to branch on. See the table above.

string

Allowed values: all_segments_visible_reset_not_acknowledged artwork_reservation_not_usable audit_unavailable auto_assigned_segments_present credit_account_not_found cursor_not_supported_with_search denial_reason_not_available division_code_conflict division_create_requires_address division_not_found division_not_on_site division_parent_invalid image_not_found insufficient_scope internal_error invalid_active invalid_adjustment_type invalid_cursor invalid_credit_account_id invalid_division_id invalid_image_id invalid_image_patch invalid_item_number invalid_order_number invalid_product_id invalid_product_patch invalid_quantity invalid_query invalid_request invalid_segment_ids invalid_segments_body invalid_service_type invalid_shipping_quote_request invalid_site_id invalid_submission_id invalid_token invalid_user_id invalid_variant_id invalid_variant_patch monolith_rejected monolith_target_missing null_not_supported order_item_cancelled order_item_not_found order_not_found ordering_not_provisioned parent_is_self parent_not_on_site partner_order_id_reused product_not_found product_write_partially_applied proof_not_pending_review quote_invalid quote_product_not_found rate_limit_exceeded search_not_available segment_not_on_site service_unavailable shipping_quote_unavailable site_id_required_for_search site_not_found sls_null_backfills_master submission_not_found template_not_found unknown_country_code unknown_query_parameter unknown_state_code unsupported_field_for_service_type updated_since_not_supported user_already_exists user_not_found variant_not_site_addressable

detail

required

Human-readable explanation. Do not parse this – it may be reworded without notice.

string

requestId

required

Echoes the request’s id. Include this when contacting Partner Integrations about a specific failed call – it resolves directly to one log entry.

string

Example

{
  "type": "about:blank",
  "title": "Internal Server Error",
  "status": 500,
  "code": "internal_error",
  "detail": "An unexpected error occurred.",
  "requestId": "8f3c1e2a-..."
}

503

Transient failure in the service or the database it reads from (for example, the Aurora reader could not be reached in time), or the request never reached application code at all because the Lambda behind it crashed, timed out, or hit its own concurrency limit. Retryable, with backoff.

Media typeapplication/problem+json

RFC 9457 application/problem+json body. code is the published, stable, machine-readable field to branch your integration logic on – detail is a human-readable string that may be reworded over time and must not be parsed.

This table is the whole published set: every code this API can return appears below, and nothing below is unreachable. test/docs/openapi-matches-reality.test.ts compares the enum to the codes the handlers actually construct, so a code added to one side and not the other fails the build rather than shipping.

Published code values:

code	HTTP status	Meaning	Retry?
invalid_cursor	400	The cursor query parameter could not be decoded.	No – restart pagination with no cursor. Do not resend the same value.
invalid_site_id	400	The siteId filter is not a positive integer, or it names a site outside your grant. detail says which.	No – fix the parameter against GET /v1/me’s grantedSiteIds.
invalid_order_number	400	The order number in the path is not a positive integer.	No – fix the path.
invalid_product_id	400	The productId path segment on GET /v1/products/{productId} does not match the SLO_/SLS_-prefixed shape.	No – fix the path.
invalid_service_type	400	GET /v1/products’s serviceType filter is not one of the values this API can order (STOCK or POD).	No – fix the parameter.
updated_since_not_supported	400	An updatedSince parameter was sent. Rejected rather than ignored, on purpose – see “No updatedSince / no change polling” above.	No – remove the parameter; there is no change-polling mechanism to switch to.
invalid_request	400	POST /v1/orders’s request body failed validation – malformed JSON, a missing or malformed field, an unknown key, or a body-level rule such as partnerLineId uniqueness or a misplaced shipTo – or GET /v1/orders/submissions’s status/limit filter is malformed. detail names the exact violation.	No – fix the request.
invalid_submission_id	400	The submissionId path segment on GET /v1/orders/submissions/{submissionId} is not a well-formed UUID.	No – fix the path.
invalid_quantity	400	The quantity on POST /v1/products/{productId}/quote is missing or not a positive integer.	No – fix the request body.
invalid_shipping_quote_request	400	POST /v1/shipping/quote’s body failed validation – malformed JSON, a missing or mistyped field, an unknown key at the top level or inside shipTo, or a weightOunces outside 0 < w <= 5000000. detail names the field.	No – fix the request body.
invalid_item_number	400	The itemNumber path segment on a proof route is not a positive integer. It is the line’s itemNumber from GET /v1/orders/{orderNumber}/items, never a Collaterate internal id.	No – fix the path.
invalid_token	401	The credential is missing, expired, or invalid.	No – mint a new token, retry once, then investigate the credential.
insufficient_scope	403	The token lacks the scope required for this operation.	No – mint a token with the required scope.
order_not_found	404	No such order, or one that exists outside your granted sites (see above).	No.
order_item_not_found	404	No line matching (orderNumber, itemNumber) resolves for you – absent, outside your granted sites, or hidden from the customer, identically.	No.
product_not_found	404	No such product, or one that exists but belongs to a site outside your granted sites (same rule as order_not_found).	No.
quote_product_not_found	404	The product resolved in our own catalog but Collaterate could not price it. Rare.	No.
template_not_found	404	GET /v1/products/{productId}/template found no Chili template for this product – not TEMPLATE-classified, TEMPLATE-classified with a legacy EDOC/CANVA vendor, or Chili-templated with no document configured. All three identically.	No.
submission_not_found	404	No submission exists with this id for your credential – whether it never existed or belongs to another partner, identically.	No.
ordering_not_provisioned	409	POST /v1/orders’s siteId has no ordering user configured. This is set up per (partner, site) by staff at onboarding; a partner cannot provision it themselves.	No – ask Partner Integrations to provision an ordering user for the site, then retry.
partner_order_id_reused	409	POST /v1/orders’s partnerOrderId was already used, with a request body that does not match this one. Resending the identical body under the same partnerOrderId is safe and returns the original submission (see the operation description); reusing it for a materially different order is rejected instead of silently creating a second order.	No – use a new partnerOrderId, or resend the exact original body to poll the existing submission.
proof_not_pending_review	409	A proof approve or decline was sent for a line whose proofStatus is not PENDING_REVIEW – no proof yet, already decided, or a state this API does not recognise. detail says which. On a RETRY of a decision that already succeeded, this is the expected answer and means success.	No – read the line’s current proofStatus from GET /v1/orders/{orderNumber}/items.
order_item_cancelled	409	A proof approve or decline was sent for a cancelled line. It will never be produced, so its proof cannot be decided.	No.
quote_invalid	422	Collaterate rejected the quote on business-validation grounds (e.g. quantity over the product’s configured maximum). detail carries Collaterate’s own validation message.	No – fix the request body (e.g. reduce quantity).
unknown_country_code	422	POST /v1/shipping/quote’s shipTo.country is not a country code Collaterate recognises.	No – send a code Collaterate carries (US, CA, MX, …).
unknown_state_code	422	POST /v1/shipping/quote’s shipTo.state is not a state or province of the country you sent. State codes are resolved WITHIN the country, since they are not unique across countries.	No – fix the state, or the country it belongs to.
shipping_quote_unavailable	422	POST /v1/shipping/quote produced no priced service at all for that destination and weight. detail carries Collaterate’s own reasons when it gave any – an invalid postal code for the country is the common one – and says so plainly when it did not.	No – fix the destination. An empty result is never returned as a 200.
denial_reason_not_available	422	POST .../proof/decline’s reason is well-formed but is not a denial reason this line’s proof offers – including a code that is valid on a different line, and UNKNOWN, which never is. detail lists what is valid here.	No – pick a code from GET .../proof/denial-reasons for this line.
rate_limit_exceeded	429	Rate limit or daily quota exceeded.	Yes – honor Retry-After.
internal_error	500	Unexpected server-side failure. Detail is always the fixed string below, never the underlying error.	No, or with caution – if persistent, contact Partner Integrations.
service_unavailable	503	Transient failure – typically the database path, but also a Lambda that crashed, timed out, or hit its own concurrency limit before any handler ran.	Yes, with backoff.

Three statuses are answered by the API gateway before your request reaches application code: 401 (authorizer denial), 429 (usage-plan throttle), and 503 (the Lambda integration itself failed). All three are configured to return this same document with the codes above, so one parser and one branch on code covers every error this API produces. The 403 on GET /v1/ping is the sole exception anywhere in the API – it comes from the edge firewall, which is not ours to shape, and carries no problem document.

object

type

required

Always the literal string about:blank today; reserved by RFC 9457 for future use.

string

Allowed value: about:blank

title

required

Short, human-readable summary of the HTTP status (e.g. “Not Found”).

string

status

required

The HTTP status code, repeated in the body for convenience.

integer

code

required

Stable, machine-readable error identifier. Safe to branch on. See the table above.

string

Allowed values: all_segments_visible_reset_not_acknowledged artwork_reservation_not_usable audit_unavailable auto_assigned_segments_present credit_account_not_found cursor_not_supported_with_search denial_reason_not_available division_code_conflict division_create_requires_address division_not_found division_not_on_site division_parent_invalid image_not_found insufficient_scope internal_error invalid_active invalid_adjustment_type invalid_cursor invalid_credit_account_id invalid_division_id invalid_image_id invalid_image_patch invalid_item_number invalid_order_number invalid_product_id invalid_product_patch invalid_quantity invalid_query invalid_request invalid_segment_ids invalid_segments_body invalid_service_type invalid_shipping_quote_request invalid_site_id invalid_submission_id invalid_token invalid_user_id invalid_variant_id invalid_variant_patch monolith_rejected monolith_target_missing null_not_supported order_item_cancelled order_item_not_found order_not_found ordering_not_provisioned parent_is_self parent_not_on_site partner_order_id_reused product_not_found product_write_partially_applied proof_not_pending_review quote_invalid quote_product_not_found rate_limit_exceeded search_not_available segment_not_on_site service_unavailable shipping_quote_unavailable site_id_required_for_search site_not_found sls_null_backfills_master submission_not_found template_not_found unknown_country_code unknown_query_parameter unknown_state_code unsupported_field_for_service_type updated_since_not_supported user_already_exists user_not_found variant_not_site_addressable

detail

required

Human-readable explanation. Do not parse this – it may be reworded without notice.

string

requestId

required

Echoes the request’s id. Include this when contacting Partner Integrations about a specific failed call – it resolves directly to one log entry.

string

Example

{
  "type": "about:blank",
  "title": "Service Unavailable",
  "status": 503,
  "code": "service_unavailable",
  "detail": "The service is temporarily unavailable. Please retry.",
  "requestId": "8f3c1e2a-..."
}